How to Use a Spare Router As a WiFi Extender? Learn how to save money and extend your home WiFi network using a spare router! If you have an extra router lying around, you can easily turn it into a Wi-Fi extender to help boost your signal. All you need is some time and patience to get it set up correctly. Here’s a quick guide on how to use a spare router as a Wi-Fi extender:
First, find a spot for your router. It should be close enough to the main router so that it can receive a strong signal, but not too close because that could cause interference. Once you’ve found the perfect spot, plug in your router and power it on.
Next, log into the router’s interface using your browser. The exact process will vary depending on what kind of router you have, but you should be able to find the login information in the documentation that came with it. Once you’re logged in, look for the wireless settings page and make sure the SSID (network name) is different from your main network so that you can identify it later on.
After saving those changes, go ahead and connect any devices that you want to use with the new network. Now all that’s left to do is configure the routing settings so that traffic will be forwarded from your main network to the new one. Again, this process will vary depending on your specific router model but there should be instructions available online if you get stuck.
And that’s all there is to turning an old router into a handy Wi-Fi extender! With just a little bit of effort, you can extend your existing network without breaking the bank.
- Connect your spare router to the main router using an Ethernet cable
- Configure the spare router to use the same SSID and password as your main router
- Place the spare router in a central location in your home or office
- Enjoy extended WiFi coverage!
Use an Old WiFi Router as Repeater, Wifi Extender, Access Point
Can I Use Another Router As a Wifi Extender?
Yes, you can use another router as a WiFi extender. This is called repeater mode. To use this feature, both routers must be running on the same frequencies (2.4 GHz or 5 GHz).
In repeater mode, the second router will receive the signal from the first router and amplify it. The second router must be connected to the first router via an Ethernet cable.
How Do I Turn My Spare Router into a Range Extender?
If you have an extra router lying around, you can easily turn it into a range extender to help boost your Wi-Fi signal. Here’s how: 1. Connect the spare router to your computer via Ethernet cable and log into its web interface.
2. Find the Wireless section and look for a setting called Wireless Repeating Function or something similar. Enable this option. 3. In the same section, find the main router’s SSID (wireless network name) and enter it in the appropriate field.
4. Save your changes and disconnect the Ethernet cable from both routers. 5. Place the spare router in a central location near your main router, making sure that there is no physical obstructions between them (such as walls). The further away they are, the weaker the signal will be so try to keep them close together if possible.
That’s all there is to it!
How Do I Setup 2 Routers on the Same Network?
If you want to use two routers on the same network, you will need to configure one router as a bridge. To do this, you will need to login to the router’s web interface and disable the DHCP server. You will also need to change the IP address of the router to be in the same subnet as the other router.
Once you have done this, you can connect the two routers together using an Ethernet cable.
How Do I Connect a Second Router to My Main Router?
If you have a second router that you want to connect to your main router, there are a few things you need to do. First, make sure that the second router is in the same subnet as the main router. This means that they should have the same first three octets in their IP addresses.
For example, if the main router has an IP address of 192.168.1.1, then the second router should have an IP address of 192.168.1.2 or higher. Next, you will need to configure the second router to use a static IP address. To do this, log into the web interface for the second router and find the section for network settings.
From here, you can set a static IP address for the second router. Once you have done this, save your changes and reboot the second router. Now, connect one end of an Ethernet cable to one of the LAN ports on your main router and connect the other end of the cable to one ofthe LAN ports on yoursecondrouter .
Finally , power on both routers and wait for themto boot up completely . At this point , yoursecondrouter should be connectedto yourmainrouterand working correctly .
Credit: www.wirelesshack.org
How to Use Tp-Link Router As Extender
Tp-Link Router As Extender: How to Use Tp-Link Router As Extender. By default, the TP-Link router is set to DHCP mode. If you want to use it as an extender, you need to change the mode to Bridge mode.
To do this, log in to the web interface of the TP-Link router and go to System Tools -> Firmware Upgrade. In the FirmwareUpgrade page, select “Browse” and choose the OpenWrt firmware file that you’ve downloaded earlier. Once selected, click on “Upgrade” button.
The TP-Link router will now reboot and load the new firmware. After rebooting, go to Network -> Interfaces -> Edit WAN interface and select “None (unconfigured)” from the dropdown menu next to Protocol. Then click on Save & Apply button at the bottom of the page.
Your TP-Link router is now in Bridge mode! Now connect your computer directly to one of the LAN ports of TP-Link router using an Ethernet cable and open a web browser.
Final Words
If you have an extra router lying around, you can use it as a WiFi extender to boost your home network’s coverage. All you need to do is configure the router to work in bridge mode and connect it to your main router via an Ethernet cable. Once it’s all set up, your extra router will extend the reach of your WiFi network without any hassle.
Leave a Reply